If it does, the proximity sensor will be disabled. Your phone will enter Sleep mode when you are making a handsfree call (on a speaker or headset) or if you leave the call screen during the call. In this case, press the Power button to turn the screen back on. If the fault occurs in other scenarios, ascertain the location of the proximity sensor.
Huawei Y9 Prime (2019) won’t turn on fix #2: Restart device. Restarting a device when it has a bug is one of the basic solutions. If you haven’t tried this, make sure that you do a restart at
Try removing part after part and check everytime if you can boot into BIOS. In my case, the SSD was faulty and prevented further booting, yet after removing it I was able to access BIOS. Just go through the removable parts like that (though do notice that this may affect your warranty). 1. Due-Initiative9175.
Page 29: Enter Text. Essentials Migrate Data from an iPhone or iPad On your new phone, open the Phone Clone app. Alternatively, go to Settings > System & updates > Phone Clone, touch This is the new device, then touch iPhone/iPad. Follow the onscreen instructions to download and install Phone Clone on your old device.
5- iPhone Not Turning On: Restart Your Phone. Press and keep holding the Sleep/Wake button towards the surface of the handset before the red slider looks onscreen. Slide it around to flip it off then replicate to flip the phone back. When the iPhone is rooted and can not be resumed in an ordinary way do the following:
Boot to Recovery Mode and Wipe Cache Partition. The following steps will get the Huawei Mate 9 into Recovery Mode by booting the smartphone: Press and hold the Volume Up, Home, and Power buttons at the same time. After the phone vibrates, let go of the Power button, while still holding the other two buttons until Android System Recovery screen
When Wi-Fi calling is turned on, you can make and answer calls using a Wi-Fi network when you're in an area with little or no network coverage. To turn on Wi-Fi calling, you need to establish a connection to a Wi-Fi network and select 4G (LTE) as network mode. 1. Find " Settings ". Press the phone icon. 1. Find " Settings ". Press the menu icon.
Reconnect the cable within 10 seconds of disconnecting it. Charge HUAWEI MATE 50 PRO for another 30 minutes. Press and hold the power button for five seconds. Press Reset on the screen. If Reset doesn’t appear, press and hold the power button for an additional 30 seconds. 6.
Not sure how useful this is but when I charge my Mate 20 Pro it automatically turns on, so it might do that with yours or might need enabling in the settings. I also turned on lift to wake to take the strain off pressing the button on the side when I wanted to view the screen etc.

Step 2. If you have enabled the face unlock feature, open the Settings, search for Face recognition and disable Show notifications/ Smart lock screen notifications . Step 1. Step 2. You can also try disabling App lock for WhatsApp. Open the Settings, search for App lock, and turn off the switch next to WhatsApp .

Tip 1: Perform a Forced Restart. When your HUAWEI MATE 20 PRO is stuck on the logo, a forced restart often helps overcome this hurdle. 1. Press and hold the power and volume down buttons on your HUAWEI MATE 20 PRO simultaneously. 2. Release the buttons when the phone restarts. 3.

Matebook D15 suddenly shuts down and doesn't turn on. Help. So I was in the middle of using it when it suddenly shut down. I tried just pressing the power button, long pressing the button and it did turn on, but it also shut down ASAP. The light indicator near the charging port doesn't turn on when charging it (No, I never turn it off)

Activate NFC on your Huawei Mate 20 Pro; Soft Reset your Huawei Mate 20 Pro; Turn Off Power Saving Mode; Perform Factory Reset on your smartphone; Let’s start with the above-mentioned fixes one by one in detail: Activate NFC . Before using the NFC feature, you are supposed to turn ON the NFC as it won’t start automatically.
Problem: After the battery runs out and the phone is charged, the user presses the Power button to power on the device. The startup screen is displayed, but the phone then powers off automatically. Try to reboot your HUAWEI MATE 20 LITE phone. Remove the SIM card (s) and insert it/them again. If the problem persists, purchase a new SIM card. Check if there is any damage to the SIM card or SIM card holder. Go to Network Settings and check if the specified SIM is activated.

If there are no images to be seen, then either way as a DIY repair all you can do is to temporarily replace the LCD screen and check what happens and go from there. If still no good it is on the systemboard. You would need to find the schematics for the systemboard to locate the backlight power supply circuit.

Tap the Airplane Mode icon to turn the feature on for a few seconds then tap the icon again to turn Airplane Mode off. How to fix a Huawei Mate 10 Pro smartphone that won’t turn on (easy steps) .